Tag: electric cart

Increasing efficiency and moving more product are among the best ways to increase your business’ profits.   In order to increase your bottom line though, you need to be able to move more product without taking on additional employees.  If you don’t make the appropriate equipment available though, piling more work on your employees can result in injury.

You can give your employees the power to safely move more product that they would normally be capable of by adding a battery powered electric cart to your equipment arsenal.  An electric cart will allow employees to handle heavier products, materials and supplies without increasing the chances for a work related injury.

The battery powered electric cart from DJ Products has a large flat surface capable of holding a sizeable load of products and it can travel in both forward and reverse at speeds of up to three miles per hour.  The electric cart from DJ Products is also ergonomically designed to help keep your employees safe from some of the common over use injuries that are associated with manual material handling.

In addition to the tremendous convenience and added safety your staff will experience from using an electric cart, you’ll also benefit from the reliability.  The powerful battery of the electric cart lasts for an entire eight hour shift on a single charge so there are no unnecessary delays of recharging or re-fueling.

Warehouse and distribution center environments thrive on the employee’s ability to be able to complete their job quickly and accurately.  By upgrading your current manual push carts electric carts you could dramatically increase the amount of work that could be completed in a shift.  The upgrade will not only result in more efficient employees, but you’ll also reap the benefits of a quieter, safer and happier work environment.

In order for companies to grow to meet their full potential their current procedures will most likely have to evolve.  Using traditional means of picking and shipping orders and relying on outdated equipment can result in wasted time and the possibility of mistakes.

Dividing a large warehouse into a number of smaller zones based on certain product characteristics can yield huge benefits in terms of accuracy and efficiency.  Order pickers who are directed to a specific storage rack that is clearly and properly labeled will have a much easier time fulfilling orders than an employee who’s got to search an entire warehouse for material.

Employees who have access to the best material handling equipment will also be able to complete specific tasks quickly and more accurately.  An electric cart from DJ Products is easy to maneuver in forward and reverse at up to three miles an hour, even when fully loaded with heavy parts.  This allows workers to focus on accurately picking the necessary amount or parts without having to worry about potentially struggling back to the shipping department like they would with a manual cart.

DJ Products electric cart runs on a powerful battery that can last for a full eight hour shift without needing to be recharged.  Pickers won’t have to waste time in the middle of pulling a hot order to refuel or to transfer the material that they’ve already picked to a cart that is functioning.  This reliability ultimately saves a great deal of time and extra effort and it helps employees to tackle the largest of orders with the utmost confidence.

If you want to keep the customers that you have and eventually be able to serve to new ones, you’ve got to make sure that your picking and shipping departments can readily handle the volume.  Make sure that your warehouse is properly structured and organized to handle the volume of orders that you are doing and provide your employees with safe and reliable equipment like the electric carts from DJ Products.

The key to success for many high volume office and warehouse environments is keeping valuable employees healthy and injury free.  This can be difficult if those employees are required to tackle manually moving heavy supplies and products on a regular basis without the help of properly designed equipment.

Many busy office and warehouse environments receive deliveries of multiple boxes regularly throughout the week.  Hauling in and storing deliveries consisting of heavy boxes of paper, supplies and products can put undue physical stress on employees who don’t have access to equipment that can assist with the move.

An electric cart from DJ Products can provide an affordable, safe and convenient way for employees to get heavy materials from the receiving area to the appropriate storage area.  Electric carts from DJ Products are very easy to use and can move a heavy load at speeds of up to three miles per hour.  This allows any employee of your establishment, regardless of physical strength, to move product and supplies to the required destination with minimal risk of overexertion or injury.

The battery powered electric cart from DJ has an easily accessible safety stop switch that helps to eliminate any chance of accidents or injuries while operating the equipment.  This unit is also much smaller and easier to maneuver than many other motorized options which makes it a perfect choice for businesses with narrow aisles or cramped quarters to navigate.

Some deliveries need to be signed for and tended to immediately.  Having a piece of equipment like the electric cart from DJ Products available can allow any employee to safely process deliveries regardless of the size or weight of the boxes.

Manufacturing and distribution environments that are completely reliant on manual push carts for material handling are not only limiting the employees they can hire, but increasing the chance of injury.  Any employee, even those that possess reasonable physical strength, required to haul a fully loaded manual cart weighing several hundred pounds could suffer a musculoskeletal injury from overexertion.

By upgrading from manual push carts to reliable and efficient electric carts from DJ Products employers can immediately increase the capabilities and efficiency of employees and reduce the risk of injury.  The electric cart from DJ Products works well in a variety of environments to allow virtually any employee to capably tackle the task of moving heavy supplies or materials from one location to another.

The electric cart is easy to operate via an ergonomically designed variable speed twist grip that allows employees to move heavy materials at speeds of up to three miles per hour.  The electric cart from DJ also has a built in safety stop switch that prevents warehouse accidents that could cause injuries to the operator and other employees or damage to materials.  Jobs that would have previously taken two employees or several trips to complete can be handled quickly and safely by a single employee with the help of an electric cart.

As with any equipment upgrade making the move to electric carts in favor of manual carts will require an initial investment, but it is an investment that can pay for itself in a number of ways.  The electric carts will immediately increase employee productivity and help to minimize the chances for injuries and workers’ compensation claims that could cost employers a substantial amount of money.

Material handling in a high volume warehouse or distribution environment can be a very demanding job. If warehouse employees don’t have access to the right equipment to help them perform daily shipping and receiving duties the possibility for injury is greatly increased. Upgrading from manual push carts to electric carts for performing material handling duties can increase efficiency during busy times while minimizing the chances of injury.

Injuries to valuable employees can negatively impact a distribution center in a number of ways. Even a minor injury can force an employee to miss a day or more of work which can have a dramatic impact on the quantity of work that can be completed on a given day. Losing man hours can cause high priority orders to go unshipped and create stress in relationships with loyal customers.

An increase in volume of work and demand on employees can cause more than just minor injuries though. Serious musculoskeletal injuries can sideline important employees for weeks and ultimately cost employers a substantial amount of money. Worker’s compensation claims can cost a company thousands of dollars in lost wages and medical expenses.

Having a piece of equipment like the electric cart from DJ Products for material handling can be an asset to any warehouse or distribution environment. The electric cart can increase the speed at which an employee can perform shipping and receiving duties without increasing the chances for stress related injuries.

Employees can use the electric cart from DJ to deftly maneuver heavy loads of product to the necessary points of the warehouse without creating additional stress or strain. This means that orders can be processed and filled in as timely a manner as possible without putting those that are relied upon most at risk.

In many busy distribution centers employees are required to take on multiple roles. Employees who are typically responsible for sales and administrative duties may at times be called upon to assist the shipping or receiving departments. Due to the fact that these particular tasks are much more physical in nature it helps when employees have access to equipment that is built to make material handling easier.

Electric carts, like those available from DJ Products, are designed to make transporting heavy loads of material less stressful on employees. A battery powered electric cart can help any employee, regardless of physical strength, move a delivery or outgoing shipment of heavy materials without strain. This allows a distribution center to immediately act when a high priority order rather than having to wait for a specific employee to be available to begin the process.

A distribution center that is capable of processing orders as quickly as possible will likely earn repeat business and develop strong relationships with customers. Having equipment available that allows any employee to jump into the mix when a shipment arrives or a customer has a need is a tremendous advantage. In cases where an order is high priority the distributor that can guarantee the materials to be delivered on schedule is likely to get an order.

Having electric carts and warehouse tugs available for all employees also makes the hiring process much easier for human resources departments. Distributors who use reliable and efficient electric carts for shipments and deliveries aren’t limited to hiring only those capable of heavy lifting.

The right equipment can really have a major impact in the distribution and warehousing industries. Companies who upgrade to electric carts for material handling instantly increase the efficiency of the work environment which could pave the way for increased sales.

Not every employee that works in a high volume distribution or office environment has the strength to haul around heavy boxes.  This usually means that the majority of shipping, receiving, picking and stocking needs to be performed by the specific employees who are capable of handling heavier materials.

This strategy may work 90% of the time but if there are ever instances where those specific employees who handle the heavy materials aren’t available, unnecessary delays in order processing can arise.  In order to stay ahead of the competition, your company needs to be able to provide timely and accurate service to your customers and having the appropriate equipment on site can help accomplish that.

The electric cart from DJ Products is an easy to use and incredibly versatile piece of equipment that makes it possible for any employee to haul heavy products or materials.  Any employee, regardless of physical strength, can maneuver an electric cart that is fully loaded with heavy boxes to its required destination without overexertion.

The electric cart has a tight turning radius and is small enough to be easily maneuvered down narrow aisles or in cramped quarters.  This allows even employees who’ve got limited experience operating material handling equipment to maneuver heavy loads of product or supplies without disrupting their surroundings.  The electric cart from DJ is also powered by a long lasting battery and can run for an entire eight hour shift on a single charge, so it will always be ready when an employee needs it.

An electric cart gives a high volume office or distribution environment an extra edge making each and every employee more versatile and more productive.  Any business looking for an affordable way to increase productivity could benefit from the addition of a piece of material handling equipment like an electric cart.